GREPhysics.NET
GR | # Login | Register
   
  GR9277 #61
Problem
GREPhysics.NET Official Solution    Alternate Solutions
\prob{61}
9277_61

A long, straight, and massless rod pivots about one end in a vertical plane. In configuration I, shown above, two small identical masses are attached to the free end; in configuration II, one mass is moved to the center of the rod. What is the ratio of the frequency of small oscillations of configuration II to that of comfiguration I?


  1. $\sqrt{6/5}$
  2. $\sqrt{3/2}$
  3. 6/5
  4. 3/2
  5. 5/3

Mechanics}Small Oscillations

One can derive the frequency of small oscillation for a rigid body in general by using the torque form of Newton's Laws: \tau = I \ddot{\theta} = \vec{r} \times \vec{F}. (I is moment of inertia, r is moment arm)

In this case, one has a constant downwards force F=mg, which acts at a moment arm angle \theta. Thus, I \ddot{\theta} = -rmg \sin\theta \approx -rmg \theta, where the approximation works if \theta << 1.

The equation of motion for small angles is thus \ddot{\theta}=-(mgr/I)\theta. This is similar in form to that of a simple harmonic oscillator with the angular frequency being \omega=\sqrt{mgr/I}.

Now, the problem is to find the angular frequency for each system.

One needs not worry about the rod, since it is massless and has no moment of inertia.

The moment of inertia of system I is just I_I = 2mr^2. The radius of gyration r is just r_I = 2r (an r for each mass).

The moment of inertia of system II is I_{II}=mr^2 + m (r/2)^2 = \frac{5}{4}mr^2. The radius of gyration r is just r_{II} = r/2+r=3r/2.

Thus \omega_{II}/\omega_{I} = \sqrt{(r_{II}I_{I})/(r_{I}I_{II})}=\sqrt{2\times 3 r/2/(2(5/4)\times r)}=\sqrt{6/5}, as in choice (A).

See below for user comments and alternate solutions! See below for user comments and alternate solutions!
Alternate Solutions
oliTUTilo
2012-11-04 12:17:14
I suggest using the Lagrangian formalism with the angle theta as your coordinate and the small angle approximation at hand (you just need sin(\theta) \approx \theta for small \theta). If you're comfortable with it, you can pretty quickly find the frequency of oscillation for the generalized pendulum of system II with pretty much no extraneous memorization. If you can't remember that the simple pendulum's frequency is \sqrt{\frac{g}{l}}, you can generalize the distance of the intermediate mass to quickly find the frequencies for both systems.

Let a be the distance of the intermediate mass from the pivot.

(Lagrangian) L = T -V = \{\frac{1}{2}m\dot{\theta}^2 l^2+\frac{1}{2}m\dot{\theta}^2 a^2\}-\{-mglcos(\theta}-mgacos(\theta)\} = \frac{1}{2}m\dot{\theta}^2(l^2+a^2) + mg(l+a)cos(\theta)

(Euler Lagrange Eq) \frac{\partial}{\partial t}\frac{\partial L}{\partial \dot{\theta}} = \frac{\partial L}{\partial \theta}
\frac{\partial}{\partial t}\frac{\partial L}{\partial \dot{\theta}} = \frac{\partial}{\partial t} m\dot{\theta}(l^2+a^2) = m\ddot{\theta}(l^2+a^2)
\frac{\partial L}{\partial \theta} = -mg(l+a)sin(\theta)
\Rightarrow m\ddot{\theta}(l^2+a^2)=-mg(l+a)sin(\theta) \Rightarrow \ddot{\theta} = -g\frac{l+a}{l^2+a^2}sin(\theta) \approx -g\frac{l+a}{l^2+a^2}\theta \Rightarrow \omega \approx \sqrt{g\frac{l+a}{l^2+a^2}}

For system I, a = l \Rightarrow \omega \approx \sqrt{g\frac{2l}{2l^2}} = \sqrt{\frac{g}{l}, the simple pendulum.
For system II, a = \frac{l}{2} \Rightarrow \omega \approx \sqrt{g\frac{\frac{3}{2}l}{\frac{5}{4}l^2}} = \sqrt{\frac{6g}{5l}}

So the ratio of frequencies of System II and I is \sqrt{\frac{6}{5}}

This may have looked long, but in practice you'd hopefully be better experienced with Langrangians and be able to cut corners (like knowing that out of L, only T is going to have \ddot{\theta} in it and only V is going to have \theta in it). Depends on how used to them you are, but you at least don't need to memorize anything you shouldn't have memorized anyways (crucial for me).
BrandeisUDR
2016-02-28 00:55:55
The discrepancy in your negative sign before square rooting comes from the fact that the potentials should be positive in the initial Lagrangian, not negative. Otherwise, great alternate solution.
Alternate Solution - Unverified
Comments
deniskrasnov
2013-02-16 14:13:39
I believe, as always with GRE, there's a way to get to the right answer by a process of elimination knowing only the basic of the formulae.

Simple pendulum:
\omega = \sqrt{g/l}

Step 1: The answer 's gotta have a square root in it, so eliminate C,D,E

Step 2: Substitute with a simpler problem: both masses at their combined center of mass ( that is instead of one mass being at half length and the second at full length we contemplate a pendulum with both masses at 3/4 length) . This gives us \sqrt{4/3}
the final answer has to be less than the latter (because we have to move weights apart , thus adding an additional moment of inertia that slows down the oscillation. Eliminate B.
A. is your only remaining choice.
NEC
oliTUTilo
2012-11-04 12:17:14
I suggest using the Lagrangian formalism with the angle theta as your coordinate and the small angle approximation at hand (you just need sin(\theta) \approx \theta for small \theta). If you're comfortable with it, you can pretty quickly find the frequency of oscillation for the generalized pendulum of system II with pretty much no extraneous memorization. If you can't remember that the simple pendulum's frequency is \sqrt{\frac{g}{l}}, you can generalize the distance of the intermediate mass to quickly find the frequencies for both systems.

Let a be the distance of the intermediate mass from the pivot.

(Lagrangian) L = T -V = \{\frac{1}{2}m\dot{\theta}^2 l^2+\frac{1}{2}m\dot{\theta}^2 a^2\}-\{-mglcos(\theta}-mgacos(\theta)\} = \frac{1}{2}m\dot{\theta}^2(l^2+a^2) + mg(l+a)cos(\theta)

(Euler Lagrange Eq) \frac{\partial}{\partial t}\frac{\partial L}{\partial \dot{\theta}} = \frac{\partial L}{\partial \theta}
\frac{\partial}{\partial t}\frac{\partial L}{\partial \dot{\theta}} = \frac{\partial}{\partial t} m\dot{\theta}(l^2+a^2) = m\ddot{\theta}(l^2+a^2)
\frac{\partial L}{\partial \theta} = -mg(l+a)sin(\theta)
\Rightarrow m\ddot{\theta}(l^2+a^2)=-mg(l+a)sin(\theta) \Rightarrow \ddot{\theta} = -g\frac{l+a}{l^2+a^2}sin(\theta) \approx -g\frac{l+a}{l^2+a^2}\theta \Rightarrow \omega \approx \sqrt{g\frac{l+a}{l^2+a^2}}

For system I, a = l \Rightarrow \omega \approx \sqrt{g\frac{2l}{2l^2}} = \sqrt{\frac{g}{l}, the simple pendulum.
For system II, a = \frac{l}{2} \Rightarrow \omega \approx \sqrt{g\frac{\frac{3}{2}l}{\frac{5}{4}l^2}} = \sqrt{\frac{6g}{5l}}

So the ratio of frequencies of System II and I is \sqrt{\frac{6}{5}}

This may have looked long, but in practice you'd hopefully be better experienced with Langrangians and be able to cut corners (like knowing that out of L, only T is going to have \ddot{\theta} in it and only V is going to have \theta in it). Depends on how used to them you are, but you at least don't need to memorize anything you shouldn't have memorized anyways (crucial for me).
BrandeisUDR
2016-02-28 00:55:55
The discrepancy in your negative sign before square rooting comes from the fact that the potentials should be positive in the initial Lagrangian, not negative. Otherwise, great alternate solution.
NoPhysicist3
2017-03-23 12:23:03
This is very good, however this is not what ETS wants.
Alternate Solution - Unverified
walczyk
2012-10-11 00:01:45
I looked at this for awhile, and I know now that saying "radius of gyration" is incorrect, it should be distance from the center of mass. Radius of gyration r_g is defined as r^2_g = I/m. This will get you a value of sqrt{5/8} instead of 3/4 and sqrt{8/5} instead of 6/5. Interestingly both are fairly accurate, that is because r_g is the root mean square value of the distance from the center of mass. If the masses were not equal then your answer would actually turn out to be incorrect. I hope this clarifies thisngs for everyone else. Also I just received a new practice exam of 100 questions a few days ago.NEC
Setareh
2011-11-06 13:21:43
Could anyone tell me why I will be wrong if I go this way: There is no net torque, so L should be conserved. L(f)=L(i) ---> I(f)w(f)=I(i)w(i) ; I(i)=2ml^2 ; I(f)=ml^2+m(l/2)^2, so we will have: w(f)/w(i)=8/5 which is in the choices!!
Setareh
2011-11-06 13:30:39
I got my answer, I had a problem in the concept of NET torque.. I thought since the torque is not change in both states so there is no net torque, now I see I was wrong..
NEC
Da Broglie
2011-04-07 16:54:09
This is actually nice n simple no small angle approximations or torque equations needed.

recall the period for physical pendulums:

\tau=2\pi\frac{\sqrt{I}}{\sqrt{mgl}} I is inertial and l is distance to center of mass

invert and times by 2\pi for angular frequency.

for I I=2ml^2 and l=l

for II I=ml^2+m\left(\frac{l}{2}\right)^2 and l=\frac{l+\frac{l}{2}}{2}

plug in and divide to get \sqrt{\left( \frac{6}{5}\right)}
62a
2016-10-02 23:57:45
Best answer. That\'s one simple and general equation that has certainly been neglected in my education. Small-angle approximations are very useful but should not be emphasized at the expense of exact formulas that are only slightly more complicated!
NEC
Muphrid
2009-11-06 22:09:26
Once again, Taylor expansion can come to the rescue here. If you know nothing about radii of gyration, you need only remember that any potential well can be approximated by a simple harmonic potential. In this case

U \approx \frac{1}{2} k \theta^2

We know the potential energy exactly. For situation I, it's U = 2m g h = 2m g R \cos \theta. We need only approximate this to second order. Remember \cos \theta \approx 1 - \frac{\theta^2}{2}. Drop the constant order part to get

U \approx \frac{1}{2} (2m) g R \theta^2

Identify k = 2m g R. Now we have the familiar formula for a linear oscillator of \omega = \sqrt{k/m}, but that doesn't apply in an angular oscillator. The mass isn't right. The angular analogue of mass is rotational inertia, I. For the first case, I = 2 m R^2, and you get \omega = \sqrt{2mgR/2mR^2}  = \sqrt{g/R}.

Carry this out for case II now. I = 5/4  m R^2. U = \frac{1}{2} \frac{3}{2} m g R \theta^2. Thus, k = \frac{3}{2} m g R, and \omega = \sqrt{k/I} = \sqrt{6g/5R}. This gets you the ratio 6/5.
NEC
ramparts
2009-08-15 19:41:19
Alright, so the original answer has the radii of gyration off by a common factor, so the ratio stays the same. Are we really going to split hairs over this in 1.8 minutes?NEC
hoyas08
2008-06-18 17:02:09
I think georgi has it right in a previous post.

w=\sqrt{\frac{MgR_{com}}{I}} for a pendulum in general, where R_{com} is the distance from the pivot to the center of mass along the pendulum and M is the total mass. Then, for config. I, w_I=\sqrt{\frac{2mgr}{2mr^2}}. For config. II, w_{II}=\sqrt{\frac{2mg(\frac{3}{4}r)}{m(\frac{1}{2}r)^2+mr^2}}.

After the algebra, you arrive at answer (A).
gliese876d
2008-10-08 12:04:22
Thank you for this clarification! I knew for config 1, it should end up being the same as a simple pendulum: \sqrt{g/r} but then I was getting confused on the physical pendulum formula and mistakenly using r rather than \R_com
gliese876d
2008-10-08 12:29:22
Thank you for this clarification! I knew for config 1, it should end up being the same as a simple pendulum: \sqrt{g/r} but then I was getting confused on the physical pendulum formula and mistakenly using r rather than \R_com
NEC
Jeremy
2007-11-01 13:46:23
It took me a long time, but I finally figured out what the solution is really saying.

First off, \omega = \sqrt{M g R_{com}/I} is the general equation. I explicitly show that the length is a moment arm to the center of mass. Next, I point out that "radius of gyration" (R_{g}) is not what the author really means; this is seen in how they calculate it and use it. The radius of gyration is given by I=M R_{g}^{2}, M being the total mass. Thus it does not follow superposition as implicitly suggested by the solution, and, in terms of it, the frequency would still depend on R_{com}: \omega=\sqrt{g R_{com}}/R_{g}. (Clearly, the radius of gyration is not a useful quantity in this calculation - why add another length? Just use R_{com} expressed as a fraction of the length of the rod).

So what's really going on? Well, look at their r_{I} and r_{II}. Notice that r=2 R_{com} in both cases. Essentially, what they have is r=M R_{com}=2 m R_{com}, but with the m omitted. Their expression for the frequency is \omega=\sqrt{g r/I}. Which, you can see, will lead to a correct answer.

I think a more logical solution would have r_{I} and r_{II} represent moment arms to the respective centers of mass, which would have the effect of halving their current values (found by r_{I}=\frac{m r+m r}{2 m}=r and r_{II}=\frac{m \frac{r}{2}+m r}{2 m}=\frac{3}{4} r). The moments of inertia are correct, so just use the appropriate values for r_{I} and r_{II} in the final equation to arrive at the solution.
NEC
theodiggers
2007-10-07 16:13:12
What is this radius of gyration? Wikipedia doesn't give you much, why can't this be worked with CM? Georgi, its really seeming like your method fails, and its what I tried initially too. Get a CM of 3/4R, get your moment of inertia to be (9/8)MR^2, but then you get \frac{2}{\sqrt{3}}, which is fail.
theodiggers
2007-10-07 16:17:50
Sorry, I'm an idiot. Can't calculate moments of inertia with CM...
theodiggers
2007-10-07 16:27:47
...Freedman and Young gives no reason why this fails in general, only an example of its failure. Why does this fail in general?
NEC
georgi
2007-08-26 20:52:13
you don't have to go through the derivation and i highly doubt ets wants you to go through it in 1.7 minutes.

recall the formula for a physical pendulum st w = \sqrt{mgh/I} where h is the distance from the pivot to the center of mass and everything follows trivially from there.
NEC
sharpstones
2007-03-26 18:27:07
If you never heard of radius gyration in mechanics (like I did learning from Taylor) then listen up! Start with:

I\ddot{\theta}=\vec{r} \times \vec{F}

For case I the right side of the equation will be: -2mgr \sin (\theta) since the masses are located at distance r from the hinge and the mass is  2m

For case II the right side is: -mg \frac{r}{2} \sin(\theta) -mgr\sin(\theta) since you have to add the torque due to gravity acting upon each mass.

Use small angle approximation to get an equation for the frequency with moment of inertia being  MR^2 for I and MR^2 + M (\frac{R}{2})^2 for II take the ratio and bam!
chemicalsoul
2009-11-04 20:03:47
This is a nice alternate solution. Someone should write it out nicely and post it as alternate solution. I am challenged by how to type out the eqns otherwise i would have done it.
liliapunto
2013-07-14 22:34:48
perfect.
NEC
am_indian
2006-11-30 09:36:20
Wouldn\'t F=2mg?

I also get \\sqrt{5/8}

Which is not a choice. Help.
flyboy621
2010-10-22 13:32:24
The force of gravity acts on the center of mass of each pendulum (not on the end of the rod). System 1 has CM at the end of course:rnrnR_1 = lrnrnif l is the length of the rod. System 2 has the CM atrnrnR_2 = \frac{3}{4}l by inspection, or if you like,rnrnR_2 = \frac{1}{2m}(m(\frac{l}{2}) + ml) = \frac{3}{4}lrnrnThe r used in the official solution should be the moment arm of the center of mass, and is NOT the same for both pendulums.rnrnThe ratio of frequencies is thenrnrn\frac{w_2}{w_1} = \sqrt{\frac{R_2 I_1}{R_1 I_2}} = \sqrt{\frac{\frac{3}{4} (2)}{\frac{5}{4}}} = \sqrt{\frac{6}{5}}rn
flyboy621
2010-10-22 13:35:23
Not sure why my formatting didn't look the same as in the preview. Everywhere you see "rnrn" read as a double carriage return. My point is the "r" used in the official solution is not the same for both pendulums, as it is at the center of mass of each.
NEC
am_indian
2006-11-30 09:36:09
Wouldn't F=2mg?

I also get \sqrt{5/8}

Which is not a choice. Help.
NEC
herrphysik
2006-08-29 21:48:05
I believe that there is a problem with the radii of gyration you have specified. If all the mass were relocated to the radius of gyration (ROG), the moment of inertia would be the same as in the original setup. It doesn't make sense that your ROGs are larger than r, and for configuration I) all the mass already is located at one point and so the ROG should just be r. The corrections I think that need to be made are:

1) In the angular frequency equation, m=2m

2) The ROG in config. I) is just r

3) The ROG in config. II) is 3r/4

This will of course give the same answer.
dirichlet
2006-11-27 12:00:48
I think that is not the r of gyration for con 2 either . That would be {sqrt(5/8)}r
Typo Alert!

Post A Comment!
You are replying to:
Could anyone tell me why I will be wrong if I go this way: There is no net torque, so L should be conserved. L(f)=L(i) ---> I(f)w(f)=I(i)w(i) ; I(i)=2ml^2 ; I(f)=ml^2+m(l/2)^2, so we will have: w(f)/w(i)=8/5 which is in the choices!!

Username:
Password:
Click here to register.
This comment is best classified as a: (mouseover)
 
Mouseover the respective type above for an explanation of each type.

Bare Basic LaTeX Rosetta Stone

LaTeX syntax supported through dollar sign wrappers $, ex., $\alpha^2_0$ produces .
type this... to get...
$\int_0^\infty$
$\partial$
$\Rightarrow$
$\ddot{x},\dot{x}$
$\sqrt{z}$
$\langle my \rangle$
$\left( abacadabra \right)_{me}$
$\vec{E}$
$\frac{a}{b}$
 
The Sidebar Chatbox...
Scroll to see it, or resize your browser to ignore it...